| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Window/Glass | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001GDF00MX |
| Title: WINDOW / GLASS: WINDOW DEFOGGER WIRE: REPAIR (2008 Sequoia) | ||
REPAIR
1. IF NECESSARY, REPAIR DEFOGGER WIRE
|
(a) Clean the broken wire tips with grease, wax and silicone remover. |
(b) Place masking tape along both sides of the wire.
|
(c) Thoroughly stir the repair agent ("DuPont" paste No. 4817 or the equivalent). |
(d) Using a fine tip brush, apply a small amount of the agent to the wire.
(e) After a few minutes, remove the masking tape.
NOTICE:
Do not repair the defogger wire again for at least 24 hours.
|
|